DoD UID | contact us

MASS Group, Inc. distributes a full line of industrial automation hardware including laser etchers and 2D data part scanners.

The laser can be used to mark glass panels such as solar panels where intense heat and environmental extremes prohibit use of other methods.

MASS Group is a total solution provider for hardware and software to decode both Bar Codes and Data Matrix as well as provide the enterprise software to track and manage the information. We specialize in both handheld and fixed mounted scanners and vision systems that allow you to read the 2-d barcode.

See also

Vision Systems and 2D Part Scanners, 2D Barcode Scanners, 2D DataMatrix 

UID Direct Part Mark Verifiers For Aerospace Parts, Automotive Parts, Electronics Components, & Semiconductor Manufacturing

Siemens UID Compliance Verifier, DPM(for direct part marks) and the UID Compliance Verifier, LDP(for labels and data plates) allow you to comply with the U.S. Department of Defense (DoD) mandated Unique Identification (UID) policy in accordance with MIL-STD-130 and DFAR 252.211-7003. The UID Compliance Verifier, DPM is designed for verifying and validating UII Data Matrix marks created with any direct part marking technology, including laser, dot peen, chemical etch and others. The UID Compliance Verifier, LDP is designed specifically for verifying and validating labels and data plates containing UII Data Matrix marks. UID verification and validation is performed according to the following standards: AIM DPM-1-2006, ISO/IEC 16022, ISO/IEC 15415, ISO/IEC 15434, ISO/IEC 15418, SAE AS9132, DFAR 252.211-7003, MIL-STD-130L, MIL-STD-130L Change 1, MIL-STD-130M, MIL-STD-130M Change 1, Guide to Uniquely Marking Items Version 1.4, 1.5, 1.6, ATA SPEC200 Chapter 9 and ANSI MH10. Built in Dome light provides the correct illumination for curved parts, and is an expected illumination requirement in the soon to be released MIL-STD-130N.

Siemens UID Compliance Verifier, DPM(for direct part marks) 

DesignThe UID Compliance Verifier, DPM (for direct part marks) consists of a standalone desktop unit that is connected to a host PC. The unit is designed for UII Data Matrix direct part marks with a variety of size and shapes. It provides all the lighting options specified in AIM DPM-1-2006: Medium Angle Four Direction (45Q), Low Angle Four Direction (30Q), Low Angle Two Direction (30T), Low Angle Single Direction (30S), Diffuse Perpendicular (90), and Diffuse Off Axis DOME (D). This all in one unit, contains the appropriate fixed lighting and lens necessary to comply with the required data syntax string checking and Data Matrix quality grading. The UID Compliance Verifier, DPM can be used as a standalone desktop unit, portable verifier or mounted to an optional stand.

The delivered UID Compliance Verifier, DPM consists of the following components.

• UID DPM Verifier with Multifunction Illumination
• UID DPM Presentation Feet
• UID DPM Power Supply
• Ethernet network cable
• UID NIST Calibration CardUID Compliance Test Card
• UID Checker Software
• Ethernet Cross Link Adapter
• Serial Communications Cable
• Getting Started Guide

6GF3020-0UD10-0DP1
List Price: $9995.00 | Your Price: Please Call Or Email For Complete System

List Price: N/A | Your Price: Please Call Or Email For Complete System
 

2D Barcode Readers / Parts Scanners